XSW2-Cl1
优化你的声音,一款为乐手专门设计的高度灵活、坚固耐用的便捷式一体化无线话筒产品。
选择产品变体

优化你的声音,为那些希望更进一步快速使用系统的用户提供灵活性。XS WIRELESS 2 INSTRUMENT SET 乐器套装,是专门为吉他乐手和贝斯手设计的完整无线系统,在现场演出中提供卓越表现。套装中包含体积小巧的腰包式发射器,以及结实耐用的乐器线缆。XS WIRELESS 2 接收机具有直观的LCD液晶显示屏,提供了丰富的手动控制选项。金属外壳的接收机和附赠的机架固定组件,让该系统更适合在苛刻的现场演出环境中使用,并在UHF频带内提供多达12个兼容的传输通道。

  • 坚固耐用的乐器线缆和小型腰包发射机

  • 采用金属外壳的真分集接收机

  • 外置天线

  • 通过远程控制通道实现自动频率规划和同步,设置便捷

  • 在UHF频段内选择工作频点

  • 附赠机架固定组件

  • 多达12个兼容通道

评测
Be the first to write a review.

Specifications
包装内含
  • 1 台接收机EM-XSW 2
  • 1个腰包发射机SK-XSW
  • 1根乐器线缆Cl1
  • 1个电源适配器NT 12-5 CW
  • 2节AA电池
  • 1套机架固定组件
  • 1个存储袋
  • 用户手册

支持
联系我们
Product Support Phone

Product Phone


FAQ
  • How do I find a frequency (ie: perform a frequency scan)?

    To perform a frequency scan on the XS Wireless products follow these steps:

    1) Press the "UP" or "DOWN" button to scroll through the menu options on the receiver.

    2) Press the "SET" button to select the SCAN option. NOTE: The unit automatically selects the next available unused frequency. 

    Once the new frequency is selected on the receiver the transmitter needs to by synced to the receiver. To do this follow these steps:

    1) Press and hold the "SYNC" button on the transmitter until the "SYNC" symbol flashes on the receiver.

    2) Press the "SYNC" button on the receiver.

    NOTE: If a frequency SCAN is performed and no available frequencies are found then the SQUELCH setting will need to be increased. Once the SQUELCH setting has been increased repeat the steps of the frequency scan and then SYNC accordingly.



  • What adjustments can I do to improve sound quality?

    There are two settings that have the greatest effect on sound quality:

    MICROPHONE SENSITIVITY
    This is how sensitivity the microphone pick up is and this is adjusted on the microphone/body pack itself. Typically for general speaking the sensitivity should be set around -15 to -18 dB. You will need to adjust this depending on the exact application. Adjusting closer to 0 dB is will be more sensitive and further away from 0 dB is less sensitive. If the microphone is too sensitive the input will overload the microphone and the AF level will peak and the audio will be clipped.  It is suitable to adjust the level so that the AF peak indicator lights up only briefly during the loudest passages.

    AF OUTPUT
    This is how strong the signal is exiting out of the receiver into the sound board/speakers/etc. Typically this will be set to 0 dB or +6 dB if connected to equipment which is expecting a line level input . If you are connected to equipment expecting a mic level input you will typically need to drop this AF output down to -24 dB or -30 dB.  If your equipment has the option, it is best to try to run the equipment in line level mode.

    NOTE: If the AF Output is too high it may over load the input on any connected equipment (sound board/speakers/etc) and may create noise in the form of distortion/rumbling.



  • Why is there no audio coming from the microphone?

    Not having audio coming from a microphone could be caused by a few different scenarios.
    Firstly check that the transmitter and receiver are both on the same frequency as this is key to the system working.
    Next check to make sure that the "MUTE" switch is not accidentally engaged (either fully or partially). The best way to do this is click the mute switch on and then back off.
    After checking the "MUTE" switch if no audio is present make sure that the microphone element is securely in place. If using a body pack transmitter make sure that the microphone or guitar cable is securely in place by disconnecting it and reconnecting it. NOTE: On the handheld microphone the capsule is locked into place and cannot come loose.
    If you are seeing RF and AF levels on the receiver but do not have any sound through your system it would be recommended to check the cables between the receiver and sound system, check the inputs on the sound system and check the AF out level on the receiver to ensure that it is set to the appropriate level for your sound system.



下载

  • Mounting Instructions
  • 快速指南
    • 简要说明 XS Wireless 2 (7.4 MB) 下载

  • 技术参数
    • 技术参数 XSW 2 (4.4 MB) 下载

  • 欧盟符合性声明
    • EU Declaration of Conformity XS Wireless 1 / XS Wireless 2 series (650 KB) 下载


  • 相似产品