XSW2-ME3
彻底摆脱双手束缚。灵活、坚固的一体化无线话筒头戴套装。适合歌手和主持人使用
选择产品变体

彻底摆脱双手束缚。为那些希望可以快速上手的用户提供灵活性。XS WIRELESS 2 HEADMIC SET头戴套装,是专门为歌手和演员设计的完整无线系统,尤其适合唱跳类型的现场演出。套装中包含体积小巧的腰包式发射器,以及轻巧的头戴式麦克风。XS WIRELESS 2 接收机具有直观的LCD液晶显示屏,提供了丰富的手动控制选项。金属外壳的接收机和附赠的机架固定组件,让该系统更适合在苛刻的现场演出环境中使用,并在UHF频带内提供多达12个兼容的传输通道。

  • 轻型头戴式话筒和小型腰包接收机,摆脱双手束缚

  • 采用金属外壳的真分集接收机

  • 外置天线

  • 通过远程控制通道实现自动频率规划和同步,设置便捷

  • 允许手动选择工作频点

  • 附赠机架固定组件

  • 多达12个兼容通道

评测
Be the first to write a review.

Specifications
包装内含
  • 1 台接收机EM-XSW 2
  • 1个腰包发射机SK-XSW
  • 1支头戴式话筒ME 3-II
  • 1个电源适配器NT 12-5 CW
  • 2节AA电池
  • 1套机架固定组件
  • 1个存储袋 用户手册

支持
联系我们
Product Support Phone

Product Phone


FAQ
  • How do I find a frequency (ie: perform a frequency scan)?

    To perform a frequency scan on the XS Wireless products follow these steps:

    1) Press the "UP" or "DOWN" button to scroll through the menu options on the receiver.

    2) Press the "SET" button to select the SCAN option. NOTE: The unit automatically selects the next available unused frequency. 

    Once the new frequency is selected on the receiver the transmitter needs to by synced to the receiver. To do this follow these steps:

    1) Press and hold the "SYNC" button on the transmitter until the "SYNC" symbol flashes on the receiver.

    2) Press the "SYNC" button on the receiver.

    NOTE: If a frequency SCAN is performed and no available frequencies are found then the SQUELCH setting will need to be increased. Once the SQUELCH setting has been increased repeat the steps of the frequency scan and then SYNC accordingly.



  • What adjustments can I do to improve sound quality?

    There are two settings that have the greatest effect on sound quality:

    MICROPHONE SENSITIVITY
    This is how sensitivity the microphone pick up is and this is adjusted on the microphone/body pack itself. Typically for general speaking the sensitivity should be set around -15 to -18 dB. You will need to adjust this depending on the exact application. Adjusting closer to 0 dB is will be more sensitive and further away from 0 dB is less sensitive. If the microphone is too sensitive the input will overload the microphone and the AF level will peak and the audio will be clipped.  It is suitable to adjust the level so that the AF peak indicator lights up only briefly during the loudest passages.

    AF OUTPUT
    This is how strong the signal is exiting out of the receiver into the sound board/speakers/etc. Typically this will be set to 0 dB or +6 dB if connected to equipment which is expecting a line level input . If you are connected to equipment expecting a mic level input you will typically need to drop this AF output down to -24 dB or -30 dB.  If your equipment has the option, it is best to try to run the equipment in line level mode.

    NOTE: If the AF Output is too high it may over load the input on any connected equipment (sound board/speakers/etc) and may create noise in the form of distortion/rumbling.



  • Why is there no audio coming from the microphone?

    Not having audio coming from a microphone could be caused by a few different scenarios.
    Firstly check that the transmitter and receiver are both on the same frequency as this is key to the system working.
    Next check to make sure that the "MUTE" switch is not accidentally engaged (either fully or partially). The best way to do this is click the mute switch on and then back off.
    After checking the "MUTE" switch if no audio is present make sure that the microphone element is securely in place. If using a body pack transmitter make sure that the microphone or guitar cable is securely in place by disconnecting it and reconnecting it. NOTE: On the handheld microphone the capsule is locked into place and cannot come loose.
    If you are seeing RF and AF levels on the receiver but do not have any sound through your system it would be recommended to check the cables between the receiver and sound system, check the inputs on the sound system and check the AF out level on the receiver to ensure that it is set to the appropriate level for your sound system.



下载

  • 频率表
    • Frequency Sheet XS Wireless 1&2 GB range (606 - 630 MHz) (230 KB) 下载

    • Frequency Sheet XS Wireless 1&2 A range (548 - 572 MHz) (190 KB) 下载

    • Frequency Sheets XS Wireless 1&2 K range (925 - 937.5 MHz) (210 KB) 下载

    • Frequency Sheet XS Wireless 1&2 E range (821 - 832 / 863 - 865 MHz) (190 KB) 下载

    • Frequency Sheet XS Wireless 1&2 D range (794 - 806 MHz) (190 KB) 下载

    • Frequency Sheet XS Wireless 1&2 C range (766 - 790 MHz) (190 KB) 下载

    • Frequency Sheet XS Wireless 1&2 B range (614 - 638 MHz) (190 KB) 下载

  • Mounting Instructions
  • 快速指南
    • 简要说明 XS Wireless 2 (7.4 MB) 下载

  • 技术参数
    • 技术参数 XSW 2 (4.4 MB) 下载

  • 欧盟符合性声明
    • EU Declaration of Conformity XS Wireless 1 / XS Wireless 2 series (650 KB) 下载


  • 相似产品